30mm Thick Shutter

 

Click the Section Chart to Enlarge

30-mm-door-large

EXTRACT OF DELHI SCHEDULE OF RATES 2002

 

ISSUED BY CENTRAL PUBLIC WORKS DEPARTMENT

 

Code No.

Description

Unit

Sub Head- 14.0- Repairs to Buildings-Page Nos. 166
14.106 Providing and fixing to existing door frames 30mm. thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a UPVC hollow section of Size 60×30 mm and wall thickness 2 mm ± 0.2mm with in built decorative moulding edging on one side. The styles and rails mitred and joined at the corners by means of M.S. galvanised/plastic brackets of size 75x220mm having wall thickness 1.0m and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20mm and 1mm ± 0.1mm wall thickness. The lock rail made up of ‘H’ Section, a UPVC hollow section of size 100x30mm and 2mm ± 0.2mm wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620mm having over all thickness of 20mm and 1mm ± 0.1mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge (Plasopan)

14.106.1 30mm thick shutter

 

 

 

 

 

 

 

 

 

 

 

sqm

Pvc Doors 30mm, Door Shutters Plasopan India