Water Proof, Termite Proof, Fire Retardant, Maintenance Free, Easy to Install, Economical Durability, Anti fungi

PVC Profiles, Plastic profile, PVC Furniture, PVC sections, plastic sections, PVC extruded sections, plastic extruded sections, Modular Kitchen, portable houses, PVC Ceilings, plastic Partitions, Door frames in pvc, Plastic Extrusion, Extruded plastics, PVC Extrusion, PVC Windows, Pvc door, PVC Sheet, Glow sign, plastic industrial profile, Plastic roofing, magnetic gasket, Refrigerator Door Gaskets From India.
Home
About Us
Products
Capabilities
Advantage
Material specification
Qoute Form
Enquiry Form
Clientele
News & Events
Download Catalog
Shade Card
DIrectory
 

ADVANTAGES OF USING PLASOPAN PRODUCTS.

 

Water Proof

Water Proof Our products are waterproof and do not expand, contract or wharp when they come in touch with water.

Termite Proof

Termite Proof Our products are Termite proof and no termites or other insects can harm the product unlike other traditional material, which disintegrate when termite or insects attack it.

Fire Retardant

Fire Retardant. Our products burns when subjected to flame, but does not burn by itself: The product extinguishes immediately when the external flame source is removed. It has got a "A" class fire rating.

Maintenance Free

Maintenance Free. Its closed, smooth surface means that it is extremely easy to clean using gentle household detergent dissolved in water. This also means that the product is virtually dirt resistant because there are no pores, which can be filled with dirt.

Easy to Install

Easy to Install. Practically any automated or manual processing is possible. It is very quick & easy to fabricate & install these products.

Economical

Economical The prices of our products are very economical even when compared to the other alternates available in the market and apart from this it also delivers many other advantages. This is the reason PVC takes more and more market share from other materials in its applications.

Durability

Durability Our products are very durable and last more than 12 years.

Anti fungi properties. No bacteriological development on PVC.

Excellent weatherability. Weather has no effect on PVC building materials. Problems like rotting, rust, etc. just don't apply. Even in special conditions like coastal areas (salt, storm, sun) PVC is more applicable.

 

Thermal Insulation : Thermal conductivity is the measurement of the speed at which heat travels through a material through conduction. In the United States thermal conductivity (also referred to as the "k" value) is commonly expressed in terms of the number of BTUs of heat which will travel through one sq. foot of material which is one inch thick when there is one degree F temperature difference across the material (ie. Delta T). This expression is often stated as btu/in/hr/sq.ft/oF. The lower the "k" value the better the thermal insulation.

The term "R" value is frequently used to describe the performance of insulation materials. The "R" value is simply the reciprocal of the "k" value. Therefore, the higher the "R" value, the better the insulation quality.

For example: Polyurethane foam insulation board is commonly rated at a thermal conductivity of .17 (point one seven). This means that a 1" piece of foam 12" square would permit .17 BTUs of heat to move through it in one hour if there were a temperature difference of 10 F on either side. Were the temperature difference across the material to be increased to 10 degrees, then the 1.7 BTUs would move through it in the same hour.

Listed below is the thermal conductivity of some common materials.

MATERIAL

CONDUCTIVITY ("k")

INSULATIVE ("R")

Copper

2712.00

.00037

Aluminum (6061)

1160.00

.00086

Aluminum (5052)

960.00

.00104

Lead

245.00

.004

Stainless Steel (316)

113.00

.00885

Glass

5.00

.20

Polyester FRP (hand laid)

.48

2.08

Polyethylene Foam

.43

2.33

Wood (dry)

.33

3.03

Polyester FRP (pultruded)

.31

3.26

Glass Wool

.29

3.45

Polystyrene (expanded)

.28

3.57

Cork Board

27

3.70

Polystyrene (extruded)

.21

4.80

PVC (Klegecell)

.21

4.80

Air

.16

6.25

Total Vacuum

.004

250.00

The above data states that PVC having a low K value & a High R value is a very good thermal insulator than aluminium, steel & Wood.

Bondable. Additional plastic components, such as end caps can easily be bonded to PVC.

Many colours and shapes

Suitable for every type of building

 

100% mechanically recyclable

COMPARISON CHART

Parameters

Commercial Ply

Teak Ply

Laminates

Plasopan Products

Moisture/Water Sensitive Sensitive Least Sensitive Water Proof
Termite Highly Prone Highly Prone Termite Proof Termite Proof
Thermal Insulation Fair Fair Fair Excellent
Fire Inflammable Inflammable Non Inflammable Fire Retardant
Mild Alkalies & Dilute Acids Corrodes Corrodes No Reaction No Reaction
Abrasion Resistance Poor Poor Very Good Very Good
Standing Ink Spots Permanent Permanent Temporary Temporary
Installation Time/Labour Labour Intensive Labour Intensive Labour Intensive Not Labour Intensive
Reutilization after dismantling 50% 50% 25% 90%
Maintenance Periodic Painting Periodic Polishing Cleaning with soap water Cleaning with soap water
Initial Costs Less High Very High Moderate
Ageing Poor Fair Very Good Excellent

 

Enquiry Form : Get a Quote


© Plasopan Engrs. (India) Pvt. Ltd - 2003-2004 : Search Engine Optimization
Sitemap