DPC SERIES PVC DOORS

PVC Door - DPC-3025

The shutter styles made of Plaso A Section a uPVC Hollow Uni chambered Section of size 50mm x 30mm & 2mm wall thickness with in built edging on both sides . The styles will be mitred & joined at the corners by means of Galvanized Iron brackets of size 75mm x 220mm & self tapping screws. Both the vertical styles of the shutter will be reinforced by inserting primered Mild Steel tube of 1.2mm wall thickness.

The frame will be filled with Omnipan panel a uPVC Multi chambered section of size 100mm x 25mm & 1.2mm wall thickness with the distance between the supporting ribs not exceeding 26mm & joined to one another by tongue & groove, slide fitting system & having a plain surface appearance. The panels will be filled into the frame vertically. The door shutter will be tie bar with the help of nuts & washers at two places by inserting horizontally 6mm Mild Steel rod.

PVC Door - DPC-3020

The shutter styles made of Plaso A Section a uPVC Hollow Uni chambered Section of size 50mm x 30mm & 2mm wall thickness with in built edging on both sides . The styles will be mitred & joined at the corners by means of Galvanized Iron brackets of size 75mm x 220mm & self tapping screws. Both the vertical styles of the shutter will be reinforced by inserting primered Mild Steel tube of 1.2mm wall thickness.

The frame will be filled with Plasoking panel a uPVC Multi chambered section of size 305mm x 20mm & 1.0mm wall thickness with the distance between the supporting ribs not exceeding 30mm & joined to one another by tongue & groove, slide fitting system & having a plain surface appearance. The panels will be filled into the frame vertically. The door shutter will be tie bar with the help of nuts & washers at two places by inserting horizontally 6mm Mild Steel rod.