DPF SERIES PVC DOORS

PVC Door - DPF-3020 D

The shutter styles made of Plaso A Section a uPVC Hollow Twin chambered Section of size 80mm x 30mm & 2.5mm wall thickness with in built edging on both sides. The styles will be mitered & joined at the corners by means of Galvanized Iron brackets of size 75mm x 220mm & self-tapping screws. Both the vertical styles of the shutter will be reinforced by inserting primered Mild Steel tube of 1.2mm wall thickness. The shutter lock rail made of Plaso H Section a uPVC hollow multi chambered section of size 150mm x 30mm & 2mm wall thickness will be fixed to the shutter styles by means of Mild Steel U cleats & self tapping screws.

The frame will be filled with Duraking panel a uPVC Multi chambered section of size 305mm x 20mm & 1.0mm wall thickness with the distance between the supporting ribs not exceeding 40mm & joined to one another by rectangular tail, slide fitting system & having a grooved surface appearance. The panels will be filled into the frame vertically. The door shutter will be tie bar with the help of nuts & washers at two places by inserting horizontally 6mm Mild Steel rod.

PVC Door - DPF-3020 R

The shutter styles made of Plaso A Section a uPVC Hollow Twin chambered Section of size 80mm x 30mm & 2.5mm wall thickness with in built edging on both sides. The styles will be mitered & joined at the corners by means of Galvanized Iron brackets of size 75mm x 220mm & self-tapping screws. Both the vertical & horizontal styles & the lock rail of the shutter will be reinforced by inserting primered Mild Steel tube of 1.2mm wall thickness. The shutter lock rail made of Plaso H Section a uPVC hollow multi chambered section of size 150mm x 30mm & 2mm wall thickness will be fixed to the shutter styles by means of Mild Steel U cleats & self tapping screws.

The frame will be filled with Plasopan panel a uPVC Multi chambered section of size 80mm x 21mm & 1.5mm wall thickness with the distance between the supporting ribs not exceeding 26mm & joined to one another by tongue & groove, slide fitting system & having a plain surface appearance. The panels will be filled into the frame vertically. The door shutter will be tie bar with the help of nuts & washers at two places by inserting horizontally 6mm Mild Steel rod.

PVC Door - DPF-3020 C

The shutter styles made of Plaso A Section a uPVC Hollow Twin chambered Section of size 80mm x 30mm & 2mm wall thickness with in built edging on both sides. The styles will be mitered & joined at the corners by means of Galvanized Iron brackets of size 75mm x 220mm & self-tapping screws. Both the vertical styles of the shutter will be reinforced by inserting primered Mild Steel tube of 1.2mm wall thickness. The shutter lock rail made of Plaso H Section a uPVC hollow multi chambered section of size 150mm x 30mm & 2mm wall thickness will be fixed to the shutter styles by means of Mild Steel U cleats & self tapping screws.

The frame will be filled with Plasoking panel a uPVC Multi chambered section of size 305mm x 20mm & 1.0mm wall thickness with the distance between the supporting ribs not exceeding 30mm & joined to one another by tongue & groove, slide fitting system & having a plain surface appearance. The panels will be filled into the frame vertically. The door shutter will be tie bar with the help of nuts & washers at two places by inserting horizontally 6mm Mild Steel rod.

PVC Doors DPF series, DPF series pvc doors, Plastic, Pvc doors India